VKB-SIM

Uninstalled all v231d with USBdeview, then reconnected. Still no lights. Put it in bootloader mode again and flashed. When bootloader finishes and resets the device, lights stay off and the device is not listed any more.

Any update on this?

bootloader admin after bootloading:

flashing:
after flash, bootloader automatically closes and when I restart it, I get this:

Just tried it on a laptop, same behavior. Not surprising, as it worked on my PC before and the SGC still works there and could be flashed as well.

This is what I get when launching DevCfg right after putting BB in bootloader mode: 1.jpg when clicking Ok, I get: 2.jpg then I get this now: 3.jpg although yesterday I immediately got the CPUID error again in an endless loop after clicking ok. When I then click the device name, I now get 4.jpg I di...

I tried various USB ports (USB 2 and 3 versions) and disconnected other devices. When I launch DevCfg, "Restart" is greyed out. When I then select the device, I get the "It's necessary to update the firmware of the controller"-message and when I confirm, "Error read CPUID&qu...

I did as described in the video, downloaded and CRC-checked the correct firmware and flashed with zbootloader.exe in admin mode, DevCfg off, no other devices connected. After flash, the BB lights remain off. Launching DevCfg, it shows no devices. I also tried this with the other BB's USB cable.

When I then try to flash, bootloader finds the device and the blue light turns on while flashing, but when finished bootloader disappears (DefCfg does the same), the lights are off again and when I restart DefCfg, the device is not listed any more.

Yes, after connecting while pressing the button for ~10s and then releasing, DevCfg shows it as "VKB Boot NJoy32 platform v00.56".

When I connect it to the other black box, the lights turn on (blue on one side, blinking red and solid green on the other) and DevCfg shows it as Space Gunfighter. So it seems to be a problem with the MCG's black box. Is there anything I can do to get the black box working again? I opened the black ...

My VKB MCG Pro v2 started to occassionally show erratic behavior of some buttons, so I downloaded the latest VKBDevCfg-C and firmware, flashed the stick and re-calibrated it. When I then tried to upload the joystick profile again, it turned off and now the black box (black version, "BlackBox_Ma...