VKB-SIM

I've disconnected and reconnected it half a dozen times, light downwards pressure when tightening the fastener, which is tightened very tight. Any semi-quick "throw" movement is causing the blue light to go white with the adjacent red light solid.

Hi again, I recieved the replacement twist module and got around to replacing it this afternoon. The exact same issues from this thread are persisting. Interestingly, the provided twist module seems to have a second locating hole on its base. See pic below. Please advise what steps should be taken n...

a) I'm not convinced that a couple of minutes of swapping the locking pins has solved my problems - the sticks worked for hours today before the problem presented itself. b) I don't want to (and don't see why it's on me to) go out and buy sandpaper or a file to hap-hazardly whittle away the contact ...

Here is a pic of the grip contact pad.



I have swapped the locking pins and it seems to be having a positive effect on the right grip, but the left grip is now having issues.

https://imgur.com/a/4V6SPFD

As clear/close as I can make it.

I don't intend to file down my tightening bolts, we're getting into the realm of the ridiculous here.
If I even had metal files (I don't) I wouldn't feel comfortable doing this.

Here is a pic of the contact pad in the base rod.

Looks like just the grip

These are both for different handles - left and right (there are markings on them). But they are mixed up, the contact - (minus) should be against the hole for the pin when installing. But try to combine it with this photo, it doesn’t work. 8OqalSC.png L+R.jpg So what do I do now? I've obviously re...

I assumed they were left and right which was only made weirder because the "L" was what shipped with my grip originally and the "R" is what I was replacing it with.

https://imgur.com/LHbydLi Success! I've installed the older contact setup and it's working again - at least we've identified the problem! I noticed when I pulled the new contact out it looks slightly different to the old one - was I maybe sent the wrong version? See pic - old semi-working contact o...

I'm sorry you've lost me here, I'm not sure what you're asking me to do.

There is a suspicion that the wires from the contact pad of the grip were mixed up during soldering. Try swapping red and yellow in the connector. Swapped the yellow and red on the twist module connection - still all red bars across the board in Config. When I connected the USB cable the top grip L...

Right you are, my left hand grip has a blue LED on the grip, solid green on the BB.
What's confusing/alarming is that the right grip was working (albeit not flawlessly) yesterday before I swapped the contacts out.

Having taken the handle out and plugged the base in, it is registering as showing in Config.

https://imgur.com/a/ZWRnxix

And when reinstalling the grip, it's back to this after plugging everything back in.

https://imgur.com/a/SE9xUbF

https://imgur.com/a/kqyLr0S

Yep, both LEDs are solid.