VKB-SIM

5) Finally, flip the baseplate over and using some M3 copper inserts with a soldering iron, gently melt the inserts into the 3D printed plug. As shown below. final_setting.jpg The copper inserts I used where the ones below. If you have a temperature setting on your soldering iron, set it to about 2...

3) Remove the screw guide and insert the plug. Make sure the longer column goes into the hole where the origial post was and the shorter column is set into the anchoring hole. As shown below. insert_placement.jpg 4) The thin hollow tube is a collar that will be placed over the new replacement colum...

1) Start by drilling out the holes where the origional posts broke off, using a 1/4 inch drill bit . As shown below. PXL_20250528_145427178~2.jpg 2) Next, place the "Screw Guide" in the hole, to drill-out the anchoring hole for the plug insert. The following image shows how to place the g...

Replying to my own post with my own solution. Hopefully this can help anyone else that encounters this problem. I've made a 3D printable screw repair kit. repair_kit.jpg You can find the print files for the kit here: https://www.tinkercad.com/things/l5k5COAkLUO-vkbgnxbaseplacescrewrepairkit In the f...

The 2 screw mounts on the bottom of one of my GNX Modules have broken off (due to user error) and I'm looking for options to fix it. damaged_unit.jpg Does VKB offer replacement plates? I have not found one in their online store but maybe I'm missing it somehow. In lieu of an official plate, I have t...

I was having the same issues. I was running v2.115 on my THQ-SEM combo and had inconsistent "Find & Config" button, along with constant "Need to Calibrate" pop-up. Closing background apps made no difference. The only fix that worked was downgrading firmware to v2.110, so my g...

Ah, I see. I do have Logitech gaming running for my mouse. I'll try disabling that if it happens again.

Ok, I "think" I got it. I noticed the "Cancel Calibr" button was clickable after pressing "Find&AutoConfig", so I tried the following: !. Kept pressing "default" until "Find&AutoConfig" button appeared. 2. pressed "Find&AutoConfig&qu...

Quick update. I was able to get the "Find&AutoConfig" button to appear by setting both the THQ and SEM to sub address 4. Now after clicking the "Default" then "Find&AutoConfig" and then Calibrating, the Dev Config continues to tells me that I need to calibrate. ...

Thanks fallout9. The after several tries, I was eventually able to get the "Find&AutoConfig" to appear. I don't know why but most of the time it doesn't show up after pressing the Default button; which is actually the issue I have now. Dev Config now reads as NXT SEM THQ XT v2.115 but ...

I've got a THQ and SEM combo that's only showing up in Dev Config as "NXT XT" and I'm unable to calibrate or receive input from either module. devConfig.png I've tried flashing to the latest config (_GNX_USB_Controller_v2_11_5) and had no change. I've tried finding similar issues here in T...