VKB-SIM

Thanks, it did exactly what was needed

Hi VKB I'm trying to setup the POV1 to trigger a button press when I hold the tempo down to switch to analog mode on my MCGU I read the manual and can get it to do a short press OR long press tempoB. Is it possible to do short press Button OR long press TempoB + Button? Basically when I change the m...

My replacement pedals arrived and work perfectly. Thanks for the help and support!

cheers!

Let's recap: Thanks for the reply see below for response. - tried changing the USB port directly to the motherboard (no hub, no extension)? YES, plugged into a different computer also to confirm, same issue. - tried moving away from any ER source (wifi ext, router etc)? As above, different computer...

Still not working, can someone at VKB respond.
https://imgur.com/a/MssjCb3

Am I supposed to open a ticket or something, Aust distro saying I cant return them until he has HQ authorization.

Yes have done all that and posted pictures earlier, have done everything as suggested even took the cable out to continuity test it. Not particularly happy they are brand new with these problems but I'm trying to stay calm and appreciate the help to sort it :) @fallout9 I took the pedals to friends ...

This is what it is still doing after numerous attempts to get it running.

https://imgur.com/a/N7Te5nr

Yes, press default, it reboots then calibrate.

I have a access point up on the roof so its not what I would consider "close" to the pedals. Never had EMF issues with anything before and my VKB stick works perfectly.

Well done Jbar for sorting yours out, I'm not so lucky!

Pulled mine apart again and did continuity test on the cable, all appears ok. I plugged the cable in a few times and tested, still the same, no matter what I do the jitter remains and the sensor doesnt appear to smoothly move through the range as I rotate the magnet as you would expect.

what is the connector type for that lead?

OK, I pulled apart again, unplugged cable, checked, there are 3 pins per socket. put it all back together and same result. still not calibrating properly and jittering as before.

I cleaned the magnet, I also removed the circlip and took the magnet out to check it. The only thing I did not do is unplug the cable and check the pins. I'll give that a go tonight.. I'm getting pretty fast at pulling the pedals apart now.

JBar wrote:Do you think it’s an issue with my NZXT gladiator rudder axis interfering? I tried it with the joystick unplugged but hasn’t worked yet

Mine behaves the same if I have it standalone or plugged into my gunfighter base. I've tried to calibrate it many many times but still the same result.

further to this, I completely disassembled the sensor, gave it a clean. Still the same problem, I flashed the new firmware located in this thread, no improvement. I suspect a sensor issue, even after calibrating it the axis seems out of whack with the range not matching the movement of the pedals (i...