VKB-SIM

Thank you for the update.

I was having USB connection issues with EVO + SEM when I first purchased the combo and went through a some troubleshooting process documented in http://forum.vkb-sim.pro/viewtopic.php?f=25&t=6439. After tweaking with Windows setting it was ok for awhile but happened again today: * Does not conne...

I have similar issue and resolved it recently. Don't know if your issue is the same but I have documented here: viewtopic.php?f=25&t=6439

Your are welcome and thank you too It is nice to have good support and strong community when needed.

Cheers,
Jack

I found and fixed the problem just before openiing a support ticket. Thank you very much for your support! :) To those who are having simiar disconnect issues, I document my troubleshooting steps and hopefully can be helpful to you: 1. I reboot the computer and noticed that EVO always need to be re-...

Tried the 11 steps but disconnection still happens. I'm checking the rest of the threads (some is not applicable to my situation). Tyring to make sure I don't have simular issue. 1. Download software v0.92.31 and the attached firmware. Unzip them both in the same folder, same as the bootloader. 2. L...

Update: * The connection seems to be getting better, but still disconnects. Try playing DCS for a couple of sessions it still disconnects but the frequency is a lot less than before. * I have noticed that even though it is disconnected but I didn't see any red bars in the communication level window ...

I did what you suggest: Do not press any buttons on the base after connecting. Run the configurator, reset to default and only then click the Find & AutoConfig button. After that, calibrate. So far so good, it's been around 1x minutes without disconnection. I'll leave it overnight and check if I...

Hi Ron: Thank you for your quick reply. * I disable the SEM module by removing the cable connecting SEM and EVO (whithout physically separating the EVO + SEM, I guess that is ok?), reconnect USB cable, leave it for awhile, and I got disconnection couple of minutes later. * Should I do the "conf...

Run joy tester a couple of times did not get disconnect. Will keep trying to see if I can replicate the issue using

This is me running joytest and randomly moving axes on the EVO
joytester

Hi Ron: Thank you for your reply: * Here is the Global external view global_external.png * Unpluggged MCGU and T-Rudders and only leave EVO does not fix the issue. If I leave it on without touching it it still disconnect after awhile. The time for disconnection varies, sometimes it would disconnect ...

Hello I am wondering if you have found any solution since I have random disconnect for my EVO omnithrottle as well

Hi: I have recently purchased left handed EVO Omnithrottle + SEM but I am having random disconnects: Issues observed: (1). Random disconnects, either getting "Error read CPUID" dialog on VKB Device Config and/or "USB device not recognized" Windows message. Once it happens, all li...