VKB-SIM

When Delta said you should use the 3 wires cable he knew what he was saying :) I had tried it already... http://forum.vkb-sim.pro/viewtopic.php?f=25&t=7904#p61870 but didn't work. Same problem. It seems like this connector in the joystick is broken :( https://i.ibb.co/XLX6BG4/IMG-1294.jpg Nice ...

This connectors seems to be the only one connection how it works without any problems?! https://i.ibb.co/Rcd7sRM/IMG-1506.jpg Because when I had the SEM Modul on the left side of the joystick before I got my table mount, it worked well. Since I changed to the right side I got this problem. But the i...

nice information about the 2.17C, I will try that out later, when I get my joysticks back. I am prepairing them to send my josticks and SEM module now to them to let them check it (contacted VKB with a support ticket). I have tried it out and no, doesn't work. Same problem again. Only when i unplug ...

here are the screenshot from the firmware:

I can't use newer ones, because I have one of the first Gladiator NXT EVO versions, where the new firmware versions doesn't work

I thought my problem got solved, but a new problem has started :( Whenever I shut down my computer and turn it back on, my right VKB Gladiator NXT EVO joystick, including the SEM module, fails to work. However, the left joystick operates without any issues. I disconnected the USB cable of the right ...

I already had problems with my joysticks before, because they are the first versions (pre-sale) of the Gladiator NXT EVO's, as they have a different firmware and do not work at all with the currently released firmware versions. Now a too short cable and a broken slot in the joystick makes for furthe...

Since nothing helped, I found an emergency solution with a bit of DIY and simply bought a JST 2.0 4-pin 10 cm cable set. As the other end of the cable is open for soldering, I took two of these cables and soldered them together. This gave me a 20 cm cable, which is actually very practical, as for wh...

Delta wrote:Use the 4-pin to 3-pin cable. Plug the 3-pin into the stick's 4-pin socket such that the unused pin is on the same side as the black wire.

I've tried it right now and my joystick doesn't turn on this way after plugin in the usb cable.

Isn't it the same length?

Hey, I got a big problem with that module-to-joystick cable. Why did you guys made it so short? I got some table mounts and wanted to use it. But I can't use it with the SEM Module. When it is on the right side of the joystick, the cable is way to short. https://i.ibb.co/fFzB9Pq/IMG-1274.jpg And I c...

Hello everyone, I have two VKB Gladiator NXT EVO's https://i.ibb.co/Jz2xmz3/Gladiator-NEXT-EVO.png + SEM module https://i.ibb.co/FhPm5k8/IMG-0992.jpg and wanted to get suitable mounts for them. However, I have discovered that there are no sets available. It's a shame, because I'd also like to have a...

If you have one of the first Evo Sticks, then check this:
viewtopic.php?f=25&t=7649&start=30#p60614
I got the problem solved with a other firmware.

Okay, my problem got finally solved. You have found the problem Delta :idea: :!: I'm truly grateful for your help! This reminds me of a bug seen by a small number of Discord users who had very early models of EVO (before the rubber rings were added to the damper screws). Somehow, the mini throttle w...

I had bought two of the first Evos with early bird. So yeah, only my old firmware works right now. How can i get a newer firmware working? What is this KMZ41?

But I am still stuck at my old firmware