VKB-SIM

I already knew these videos, they help zero, because I've done it all. The firmware (v.2.085 and 2.086) has buggy, he have problems to detect the hardware configuration correctly. I solved the problem with trial and error, and solution is to check this two boxes. Lock the thread. https://i.ibb.co/6m...

Lots of words, but little or no interest.
I haven't seen a tutorial, image or help from you to fix this.

Help, what help? The one that was not granted?

I already said, I calibrated everything I know, and the result is the same.
Where is the tutorial/examples for the calibration of other modules?

Yes, older firmware fix this, I have tested both, but unfortunately they remove the old version from the site.

But thanks for nothing, unit return and refund requested, third and last product from this brand.
Too many problems and very poor support

I did the following: 1 - In the "Tools" click in "Dafault"; 2 - In the "Tools" "External" tab click in "FIND & SHOW"; 3 - In the "Tools" click in "Start Calibr", confirm it's ok then click in "End Calibr". I do this ...

Well, the problem is when I turn Up and Down the axes, the values won't fix on 0 and 65535, but reset and turn like a wheel. The right axle above the A4 button won't work like that, I made a video. https://youtu.be/7Df3w82xg68 I request "Gladiator NXT Firmware v2.08.0.3" if possible.

Hi In the new "VKB Device Firmware (v2.08.5 XT)" the two left axis of the GNX THQ do not work as an axis, but like sliders, in the previous firmware v2.08.0.3 they work fine. Right now I set Gladiator NXT + THQ to default, restarted and reflash, and nothing. I request "Gladiator NXT F...