VKB-SIM

Omg it worked! I was somewhat able to swap them without destroying the connector and after a calibration now works! (see attachments )

Did a partial calibration --> Same result https://youtu.be/xtV61eY8jsI Checked cable and sensor (https://photos.app.goo.gl/CW4yoNUqN272rkrD9) , no evident damage, behaviour still the same after reassembling and recalibrated. Maybe the sensor is defective and worked better when the magnet was rotated...

Sorry but that's what I did the first 10 times I calibrated it. I just checked the two unchecked boxes in the last attempt (the one filmed) since you wrote to "select all axes in the window". The results were the same.

Yes, it was not calibrated because you asked me to reset to default. Here it is after the calibration I performed: https://www.youtube.com/watch?v=P-uFAVYoQTw at the end one can see that the Y axis basically dos not work properly.
I also attached the result after the calibration.

here it is (btw I updated/downgraded the firmware too while I was waiting for a reply, so now I have a 2.071. Changing the firmware had no effect whatsoever. )

Hi, I followed the guide here http://forum.vkb-sim.pro/viewtopic.php?f=25&t=5508#p48532 and indeed the magnet came out as soon as I placed another magnet on it (see figure attached). I added some new glue (cyanoacrilate based) and reaseembled it, then re-calibrated but now the issue seems much w...

1 -VKB-Sim Gladiator NXT R Pro Version 2 - v2.010 3 -Default ones (medium) 4 - Default 5 -0.92.06 6 - see attachement 7 - see attachement Hello, I just bought and calibrated a Gladiator NXT Premium. I followed the calibration guide and video several times, and the buttons flash as expected, but ever...