VKB-SIM

Alright, here's what I did: -Glued the magnet back in place with model glue. I put the side with the black residue facing down (glue side) as I felt this was the original orientation. -re-assembled the grip. Before closing it up I inserted it into the base it to test if I got a reading out of button...

Hello, Today I finally had the time to lay my hands on the controller and disassemble it. I followed the video instructions and saw no surprises until the 4:52 mark. When I extracted the selector button board assembly from the selector lever housing as you show in the video, this is what I saw: 2021...

I've opened a ticket over at the european website flightsimcontrols.com. In the meantime I've tried ooking for the connection quality monitor, which I believe is under Test/External Devices (am I correct?). Borht my Gunfighter base and grip showed green throughout, the grip momentarily settled on 4 ...

Hello, apologies for the delay. following your instructions I downloaded the config version 0.91.96, the bootloader v1.18 and firmware '_BlackBox_MK2_GF_F14_v2_05_5'. I flashed the firmware, reset to default from the config tool, calibrated the axes then repeated the procedure for calibrating the we...

Thank you for your reply. I managed to record a video of the entire procedure, here it is : https://streamable.com/ys303a It was a bit fiddly to press all the buttons with a single hand but I hope I did it well. I saw all the test lights I was meant to according to your instructions. Unfortunately h...

Hello,

so, does anyone have any suggestions on how to fix this problem with the selector?

Here are the two screenshots as requested, and I also recorded a video operating the weapon selector. Unfortunately I wasn't able to attach the video directly, I uploaded it here: https://streamable.com/o7nwbp

Thank you for your assistance.

Giulio D.

I'll be on it as soon as I get home. Do you need me to put the selector in any particular position for this?

Giulio D.

Hello, Folowing your instruction I downloaded the Congif tool v0.91.96 and the Bootloader v1_18. I flashed the '_BlackBox_MK2_GF_F14_v2_02_5', the one for tha black box (that is the one I had been using successfully since the first time, during troubleshooting I erroneously tried the other one for t...

Dear all, I'm having problems with a Gunfighter Mk.III ‘F-14 Combat Edition’ (3-pin Rev.B), the kind with the rudder twist axis. I've loaded the '_BlackBox_GF_F14_v2_02_5' firmware using the VKB config tool v0.91.78. I can post details about the cams and springs if it's necessary but I don't thnk it...