VKB-SIM

Please follow all steps from the timestamp in the guide . Restoring to defaults and completely reconfiguring the stick solved the issue. Thanks! I suspect it was an issue with me loading a profile that was created on a previous firmware. Thankfully, the right stick didn't have this issue and I was ...

I appreciate the response, but it was showing the correct device. Good guess though. That does make sense.

The issue must have been related to me loading a saved profile from an older firmware (see reply to Fallout9 above).

I've got a mirrored set of VKB Gladiator NXT's (not the EVOs) and upgraded the firmware today to 2.165 on both of them ("_Gladiator_NXT_v2_16_5.vkb" since I don't have the OTA version). I also upgraded to the latest VKBConfig app. The right stick is working fine, but the left stick is misb...

That seems to have been it. Polling on that screen didn't show the behavior correctly. I tested it in game and it is working as expected.

Thanks, guys!

I followed the instructions in section 4.3.6 of the 2.15 version of the manual (VKBDevCfg version 0.91.96, latest) and it doesn't seem to be working. The stick is a VKB Gladiator NXT Premium - Right. Here is the button config for stage 2 of the trigger (full pull): https://drive.google.com/uc?export...

That did it! Didn't know there was a new version of the config app, so was a bit confused at first (POV output dropdown didn't include "mouse" until after I upgraded).

Thanks!

Yeah, I guess that would help, eh?! ;-) Reg#2 / Line 2 - This is my "half trigger pull" that I'm binding to the LMB: https://drive.google.com/uc?export=view&id=1GGqKAQlDfg_TnVnnoLzJeZbB63oM2dh5 Mouse config/setup: https://drive.google.com/uc?export=view&id=1ktT6hIEFe07P-UyxxceybtUh...

@fallout9 I realize this is an older post and I'm not the OP, but I'm having an issue with the mouse not working anymore and was wondering if you had any pointers/ideas. I'd initially set the trigger to mouse buttons (half for left mouse button, full for right mouse button) using the same process yo...

I figured this out. I set the curve values to control it. They default to 128, but I set all of the values for the X axis to 44 and the Y axis to 64. This causes full deflection of the ministick to stop just shy of the edge of the middle monitor. One more up (i.e. 45 and 65) would have caused the mo...

Actually, there is one other thing I'd like to try (if it's possible). I've switched from Relative mouse to Absolute and set the height/width to 1920x1080. The problem is that I have 3 monitors (for an actual resolution of 5760x1080) and I only want the deflection of the ministick to traverse the mi...

Ok, it's working now even with all of the changes I'd made to the controller (reloaded my custom config). The only difference is that I rebooted my PC.

Thanks for all your help and patience!

Just in case it matters, below is the contents of my zconfig.ini. I believe the only thing I changed was to add "Test Misc Enabled=1" under [Common] and "User=Developer" under [User]. [Misc] Read_Delay1=0 Read_Delay2=0 [Skins] Active=1 Current Skin=DarkMetro (internal) AllowAnima...

Still no dice. :-( In the VKBConfig software I hit the "Default" button on the Tools tab to rest to defaults, went to the Global tab and set up the mouse with the same settings in the screenshot above (except with the speed and rate set to "5"). I now have to push the thumbstick ...

I'll give that a shot when I get a chance. I've already got my profile saved to a file from just before messing with the virtual mouse settings so it'll be easy to get back to.

Thanks again!

Check out this thread . The only difference I saw in that post was in the Speed and Rate values for the mouse. I tried setting those to the examples in that post and it didn't make any difference. Moving the thumbstick still doesn't affect the mouse cursor. One thing I'll add is this: I changed the...