VKB-SIM

Here's the image.

Tried every port my laptop has several times, same issue persists. The base F3 LED lights up, and the top LEDs are white and red at start-up, but then turn off. No LEDs on the SEM work except when I hold down B1+2+3, but after pressing C1, they're all non-responsive. Neither Windows nor VKB config o...

Hi there, I'm having the same issue as described in this thread http://forum.vkb-sim.pro/viewtopic.php?f=25&t=6459&start=15 . My L EVO has the SEM connected on the right-hand side, and will occasionally stop being recognised by VKBconfig/Windows, and the default top blue LED is off. There is...

I don't see why not - The omni is really good, and the dry clutches mean you can calibrate the resistance fairly nicely.

If you're looking for something to tide the gap while waiting on the TECS, get a L/R (whichever hand you want for the throttle) EVO. I've been using a L-Omni EVO as a throttle for months now, and it's great - lets me fly jets, props, and space sims, providing 6DoF where needed, and the control of an...

No worries, Fallout - I've had this stick for 2 years and this is the first issue I've had after it's been used extensively. I've glued the magnet back into place, and so far it seems to be holding nicely. I'll let you know if the issue isn't resolved by this, but looks very promising so far :) Chee...

Yea, the magnet came away pretty easily. Do I just need to glue it back in, will that solve the issue?

Run through all that, Fallout, and it's a lot better, but is still having a few centring issues. It's no longer getting stuck at higher deflections, but doesn't always return the centre value of 32767 on the Axis X Test page in VKBconfig. https://imgur.com/a/c7k3Cmo Like I say, no where near as bad,...

Will do @fallout9. I'll let you know how it goes.

When you say 'delete all VKB files', does that include my profile saves for my sticks ( I have an L-EVO as well)?

I can remake the profiles easily enough, just wondering if they all need to be gone gone

Hey there folks, my NXT seems to have developed a bit of an issue... My X-axis seems to drift off, mainly to the right, and requires recalibration with VKBconfig to bring it back. This will last an intermittent time, and then the same thing will happen. https://imgur.com/d9JK7uH From a centred calib...

I got my Evo OTA L mid week, and it's been a dream. Compliments my R NXT beautifully, loving the dry clutch. Set it up with my favourite flight and space sims, and it works a treat. Couldn't be happier with it, thank you VKB, its a beauty!

Cheers, Fallout - I saw what I did wrong. I initially had my cable plugged in at the top 3, not the bottom 3 pins as you've shown above. When I did try it out in the bottom 3, I forgot to hold the B1,2,3 buttons to enter setup, so assumed it wasn't powered. All silly mistakes on my part, all fixed n...

Hi there, I'm a little confused by my new purchase. I have a brand new EVO lefty OTA and an SEM. I've connected the two, but the SEM wasn't getting power, and wasn't detected in Config. I was using the 4-pin to 3-pin connector cable on the SEM/EVO, as the 4-pin to 4-pin is too short. I had the 3-pin...

My Evo OTA lefty is in the post. So excited to unbox it, set it up as a throttle and get flying!

Nice man, I hope you get the result you like and want