VKB-SIM

i used molykote 44 medium it worked well

perfect, i'll do it tomorrow thanks a lot

hello guys i am regreasesing the joystick is it necessary to put grease inside the plastic gimbal like in this photo ??? thanks

i have the same curves in joytester after putting 2.2 and 2.3 dzlo in x and y axes it is really annoying for such a nice joystick the next step i'll try is to put some silicon grease on the gimbals

You have to move the joystick in plane 11 and assign the yaw pitch and roll depending on which axis is moving ...

just verify the screws at the back of the pedals they get loose sometimes

i found the problem the screw on the right pedal was loose though i didnt touch it ...
is all good now ,just verify all screws after you disassemble the rudder .

i have added 5 in dzo it is the only way to have symetrical left and right rudder centering

It is ROT Y axis when I press the left pedal it centers in 32767 the right one is not centered 34100 and the value changes each time I press the pedal .... I even tried calibrating by connecting black box it is the same result ...

hello thanks for your help,here are the screenshots after T rudder mk4 calibration

ive got T RUDDER MK 4( orange blackbox) with latest firmware and latest vkb deviceconfig i have the same problem and the only solution was to apply 5% dead zone near the centre is it really a fix after flipping the cam ? shouldn't be the mars sensor be precise ... thanks in advance