VKB-SIM

I checked, the dampeners are released all the way.

Ok I think I may have figured something out. I took off the extension and reattached it and I noticed the problem is much less when I do up the grip fasteners excessively tightly. Also, at some point during all this reattachment the problem transferred from the horizontal axis to the vertical axis b...

Here are the screenshots of the test. One is the left/right/up/down. One is the 4 corners. I did it with my 10cm extension attached and on my monstertech mount which is very firm. I can do it on the baseplate on the table if necessary.

Here is a picture with the nut in focus. The issue is not the tightness of the nut. Since your first post I have have tightened and loosened that nut and tried everything in between 20 different times. The problem does not resolve. And besides, if the issue was simply the tightness of the nut, why d...

Is this angle what you were looking for?

Even if I loosen the nut all the almost all the way it still moves like it does in the video. The other axis has no such problem even when much tighter.

I don't think the inner cylinder is moving smoothly with the cam. This is a video I took of the movement of the cam without any spring attached. It is stiff and jerky. https://photos.app.goo.gl/yma9FkDfDQ1dNJeK6 . I had a friend look at it and he said it feels like some part of the bolt or cam is ru...

I fully tested with space cams. Same problem on the horizontal except now it also makes a sound when crossing center.

fallout9 wrote:Have you tried with other set of cams?

Yes I did, I tried using a space cam soft. I also tried switching over the vertical cam and screw into the horizontal slot. Although I didn't put it all back together again to test with the stick, the cam definitely didn't move smoothly in that hole.

Ok so I re read your previous post and looked around inside to make sure everything was moving as you said it should be. The only differences I can see between the horizontal mechanism and the vertical mechanism (which is working) is that with no spring attached the vertical cam swings and moves smo...

Hi there, I ran the test and no problems. I've also discovered the that problem is only on the horizontal axis not on the vertical. And that it is mostly when crossing over from left to right. I tried using a different spring of the same strength but the problem persisted. I also tried tightening th...

I don't know anything about ball bearings but could it be a lubrication problem? I have some nyogel 767a but I don't want to go putting anything in or on something I don't understand.

I may have poorly described my issue. I don't hear any noises but the movement feels bumpy. At first I was absolutely certain there was a piece of dirt in there somewhere. I double checked everything you suggested and it is as it should be. Only a single spring is installed on each axis with the sle...

Hi there, I changed the springs in my gunfighter mk III for the first time today and it was easy and straightforward. However, when I put it back together again there was a grinding sensation when I moved the stick. I opened it up to see if I had done anything wrong and I hadn't. The grinding sensat...

Thank you for the information.