Search found 6 matches
- Thu Apr 14, 2022 2:04
- Forum: Technical Support
- Topic: Where is firmware available for the new KG12?
- Replies: 2
- Views: 902
Re: Where is firmware available for the new KG12?
Thank you. This firmware did the trick. It took me a few tries, but I finally figured out how to configure the 4-way hat as POV 1. What gave me trouble is that the logical button layer uses 4 for left, 5 for up, 6, for right, and 7 for down as seen in the button test. But the POV is configured using...
- Wed Apr 13, 2022 0:03
- Forum: Technical Support
- Topic: Where is firmware available for the new KG12?
- Replies: 2
- Views: 902
Where is firmware available for the new KG12?
I just received the new version of the KG12 grip. I have the original orange "black box" using a gunfighter Mk2 that has the full Mk3 upgrade kit installed. I went to the VKB America website and downloaded the latest firmware and software. The only firmware I see for the KG12 works with my...
- Sun Sep 15, 2019 7:00
- Forum: Technical Support
- Topic: Gunfighter distinct axis "dimple" w/no cam pressure
- Replies: 22
- Views: 12396
Re: Gunfighter distinct axis "dimple" w/no cam pressure
My roll axis has failed in the same manner others have described here. With no spring or cam involved, it "clunks" bad when crossing near the center due to a failure in the bearing. This causes a very bad bouncing action in the axis as seen in the software or in-game. I had recently made o...
- Sat Apr 20, 2019 3:27
- Forum: Technical Support
- Topic: Difference in Device Name/ID and Consequences
- Replies: 1
- Views: 3181
Difference in Device Name/ID and Consequences
In the game controller list, my stick's name/ID appeared as: "VKBsim Gunfighter Modern Combat PRO" But in the Device Manager it was displayed as: "VKB-Sim Gunfighter Modern Combat Pro" The differences in these two names "B-S" vs "Bs" caused a problem with the ...
- Wed Mar 06, 2019 4:31
- Forum: Technical Support
- Topic: MCG loose base
- Replies: 45
- Views: 39944
Re: MCG loose base
I finally got around to taking my grip apart. I found one screw floating around the inside and the other backed out quite a bit. I didn't have any small washers or spacers, but I had some small black nuts whose threads were loose enough to spiral up the screws and act as spacers. Now for the first t...
- Sat Feb 16, 2019 5:10
- Forum: Technical Support
- Topic: MCG loose base
- Replies: 45
- Views: 39944
Re: MCG loose base
My only criticism of my VKB MCG Pro would be the slight wiggle I have between the stick grip and its metal fitting that connects to the extension. I am surprised to find that many people have this problem. Mine did this out of the box. It has worked so well in all other ways that I never thought muc...