VKB-SIM

Thanks! The X-65F throttle is no longer better in any way.

I'd like to add to this that I've had T-Rudder Mk IV for 5 years. I never bothered with T-Link. I simply mapped a button press to the end of each axis, and it has worked perfectly in every possible simulator. If there were problems with wheels locking up then you could make a two temporary axis whic...

Hi, I'm trying to map the left encoder to work as a mousewheel (While it works as an axis trimmer which is done already) Using a "2 AND boolean" to map it to another physical button while reguiring another button to be pressed. Everything works otherwise perfectly, but I'm not able to map ...

I had the same problem with T-Rudder MK. IV. The cam follower was not contacting the cam in perfect alignment and the cam coating was flaking. I sanded the cam surface with a very fine sand paper and applied an Ukrainian made engine/metal treatment called Xado. It's supposed to make a "tribocer...

Solved this by trial and error with TRIMMER SET 2 in Button Mapping Wizard.

How can I make an axis contolled by buttons? I'm asking because I want to make an axis controlled my the 5 position detend profile rotary knob on my STECS. So I could have 0 % - 25 % - 50 % - 75 % - 100 % axis positions selectable by the knob. I would be using to control wing sweep for example where...

I think the best option would be to use the "AXES2BUTTONS EDGES2" function to configure a button press at either end of the axis. That's what I use for left or right braking and it works wonderfully. I've never bothered with the T-Link. The software is daunting at first, but it really star...

Thanks, that did the trick!

I have a NXT PRO and I'd like to have the rapid fire trigger pull to act as a switch for a temporary brake axis receiving input from the Y axis. I've managed to do this, but I would absolutely need it to work as a button press at the same time. Is this possible to achieve? Logical buttons can't be u...

Everything works now, thanks!

I believe the solution is here: http://forum.vkb-sim.pro/viewtopic.php?t=2984 I solved my issues. It was all security warning issues with windows 10. so for anyone else that runs into this. I had to right click on both the VKBDevCfg-C program and the Zbootloader-C and under properties had to select ...

No joy. It disappeared completely now. Not recognized by VKB CFG it shows up as 00.56 Lite and no flashing can be done.

I decided to update the firmware on my NXT pro but actually the result was bad, the A1 hat cannot be switched any longer and the middle press is just a button. I realized what the problem might be, the stick no longer shows as NXT PRO. There is no NXT PRO specific firmware in the firmware package. P...

VKB Device Config not working. Got a new computer and noticed that the software does not work as intended. When I launch it and select T-Rudder, the configuration page flashes for a split second and is replaced by just "Buttons / POVs Axes 1". No settings what so ever can be done, but at l...

I just got mine and I have to say there is little or no difference on the high spring setting with the milder profile. Maybe the cam profiles have been fine tuned. This issue would be easily resolved by sanding down the right side profile.